Category: Transportation Engineering

MORTH Specifications 2013 are designed by Indian Road Congress. This is designed to assist highway engineers by stipulating standards. Download

A Contour Line is a line joining equal elevation on the ground. Contour Gradient Contour gradient is the rate of change

Sokkia CX series Total Stations are reflectorless total stations. Particularly sOkkia CX 105 Reflectorless Total Station has accuracy of 5″

Download SLT12 Android Total Station User Manual SLT12 Android Total Station is a product of SATLAB GEOSOLUTIONS. Specifications of SLT12

Camber is defined as “transverse slope provided on road for proper drainage of surface water”Sometimes camber is also referred to

Traffic signs are an excellent traffic control device. There are different types of traffic signs, namely mandatory signs, warning signs,

Roads are classified in India on a different basis. The most popular system of classification of roads is as per

Superelevation design is part of the design of the horizontal alignment of a highway. Superelevation is provided to counteract the

In Surveying, linear distances are measured with chins and steel bands. Chains could be divided into the following 5 types

Surveying is the art and science of locating points in horizontal and vertical planes on the surface of the earth.

Surveying is a branch of engineering that deals with determining the relative position of different features on, above, or below

Introduction to Plane Table Surveying Plane table surveying is a graphical method of surveying and we can plot maps directly

The position and the location of the centerline of the highway on the ground is called highway alignment. Highway alignment